Product Description
Franklin QD Control Boxes
Exclusively designed for Franklin QD Relay Control Boxes, QD Pumptec is a solid state sensing device that monitors motor load and incoming power
to automatically shut off a Franklin single-phase, 3-wire motor when related fault conditions are detected. QD Pumptec protects the life of your 4-inch
pump and reduces the odds that you will ever have to see the motor again. QD Pumptec allows the user to choose the standard factory calibration for
underload or to calibrate to a particular system. Control knobs make it easy to adjust sensitivity and timeout settings. QD Pumptec easily plugs into 3-wire QD Relay Control Boxes in minutes, without additional wiring or tools.
The facts are clear and so are the choices. Franklin Electric’s Pumptec family provides the high performance pump protection you need deep down in the well. Designed to monitor motor load and supply voltage and to shut down the pump to prevent damage, Pumptec family products protect your water system investment.
Pumptec, QD Pumptec, and Pumptec-Plus are the only single-phase load monitoring devices
designed specifi cally for Franklin single-phase motors. They cover a broad range of ratings and
fault conditions:
•Air or Gas Locked Pump (Cavitation)
•Broken Shaft or Coupling
•Clogged Well Screen
•Drop in Water Level
•Faulty Check Valve
•High Voltage
•Low Voltage
•Low Yield Wells
•Rapid Cycling
•Water Logged Tank
•Worn Pump Parts
Exclusively designed for Franklin QD Relay Control Boxes, QD Pumptec is a solid state sensing device that monitors motor load and incoming power
to automatically shut off a Franklin single-phase, 3-wire motor when related fault conditions are detected. QD Pumptec protects the life of your 4-inch
pump and reduces the odds that you will ever have to see the motor again. QD Pumptec allows the user to choose the standard factory calibration for
underload or to calibrate to a particular system. Control knobs make it easy to adjust sensitivity and timeout settings. QD Pumptec easily plugs into 3-wire QD Relay Control Boxes in minutes, without additional wiring or tools.
The facts are clear and so are the choices. Franklin Electric’s Pumptec family provides the high performance pump protection you need deep down in the well. Designed to monitor motor load and supply voltage and to shut down the pump to prevent damage, Pumptec family products protect your water system investment.
Pumptec, QD Pumptec, and Pumptec-Plus are the only single-phase load monitoring devices
designed specifi cally for Franklin single-phase motors. They cover a broad range of ratings and
fault conditions:
•Air or Gas Locked Pump (Cavitation)
•Broken Shaft or Coupling
•Clogged Well Screen
•Drop in Water Level
•Faulty Check Valve
•High Voltage
•Low Voltage
•Low Yield Wells
•Rapid Cycling
•Water Logged Tank
•Worn Pump Parts
More Information
| Pump / Equipment Type | Submersible Control Box |
|---|---|
| Multi-Stage | No |
| Horsepower Rated | No |
| Voltage | No |
| Submersible Pumps - GPM Range | No |
| Total Dynamic Head | No |
| Manufacturer / Brand | No |
Also Recommended
Contact us for more product recommendations!
Discussion
Discussion
No comments just yet - be the first!
You must be logged in to post a comment.Powered by Magento Discussion Extension.
