Water Treatment Products & Supplies
Dont Pay Full Retail Prices
Buy Our Products at Factory Warehouse Prices

Add to Cart:

Goulds - 1/2 HP - SS - Multi-Stage Booster Pump - 7GBS

Our Price: $485.00

  • Model: 7GBS0514J4
  • Shipping Weight: 50lbs
  • Manufactured by: Goulds Pumps

Goulds - 1/2 HP - Multi-Stage Booster Pump






Stainless Steel
60 Hz, 2 pole, 3500 RPM
7 Gallons Per Minute
3 PH, 575V ODP
9 Stages

Features and Benefits

  • Multi-stage Design: Provides steady, quiet, vibration free, operation.
  • Optional Stainless Steel Construction: Standard cast iron for general service or stainless for filtration applications.
  • O-ring Casing Seal: Reliable high pressure sealing with easy disassembly for maintenance or repair.
  • Impellers and Diffusers: Glass filled engineered composite material with floating impeller design. High resistance to corrosion and abrasion.
  • Bowls: 300 stainless steel rabbit lock for positive alignment with no gasket required.
  • Variable Capacity: Centrifugal pump design permits selection of flow within a range for each size.
  • Mechanical Seal: A variety of face materials and elastomers to match application needs.
  • Motors: Close coupled NEMA 56J motors in open drip proof or totally enclosed design. Single phase and three phase available. Ball bearings carry all radial and axial thrust loads. Designed for continuous operation.

Applications

  • Residential, commercial or agricultural pressure wash
  • Reverse osmosis
  • Evaporative cooling systems/misters
  • Booster Service
  • Spray systems
  • Water Circulation
  • Filtration
  • HVAC
  • General Purpose pumping

General Specification

  • Capacities: to 10 GPM.
  • Maximum Flow: 10 GPM.
  • Minimum Flow: 1 GPM.
  • Heads: to 500 ft. (216 PSI).
  • Pipe Connections: 1" NPT Suction and Discharge.

      Pump

      • Maximum suction (inlet) pressure: 75 PSI.
      • Maximum Liquid Temperature: 160º F (71º C).
      • Rotation: Clockwise when viewed from motor end.
      • Maximum lift with foot valve: 10 ft. check NPSH curve.

      Motor

      • NEMA standard 56J frame.
      • Open drip proof or totally enclosed fan cooled enclosures available as standard. Consult factory for other options.
      • 60 Hz, 3500 RPM. Single phase (115/230 V), three phase 208-230 (3 HP, 230 V) or three phase (208-230/460 V).
      • Single phase motors have built-in capacitor and overload with automatic reset.
        Note: For three phase motors, overload protection must be provided in starter unit. Starter and heaters must be ordered separately.

    • Your IP Address is: 38.103.63.59
    Copyright © 2008 Supreme Water Sales, LLC.