(866) 202-8388
 
M-F: 8:30 am to 5:00 pm (EST)
Closed Weekends

Float Switch Pump Down - 10 ft Cord with Pigtail - 240 VAC

GF10W10R2 - Float Switch Specifications:
• Mechanical Float Switch
• Rated for 1/2 hp - 13/15 amps
• Normal Closed - (Pump Down)
• ABS Construction
• 16 Gauge SJOW
• 10 Ft Cord Length w/ 240 VAC Pigtail Plug
SKU: GF10W10R2

Availability: Supplier Stocked Item

$34.99
Details
Product Details
GF10W10R2 Float Switch Specifications:
• Mechanical Float Switch
• Rated for 1/2 hp - 13/15 amps
• Normal Closed - (Pump Down)
• ABS Construction
• 16 Gauge SJOW
• 10 Ft Cord Length w/ 240 VAC Pigtail Plug

Installation for Typical Pump Down Applications:
STEP 1: Attach cord, using a cable tie, to any convenient rigid surface as illustrated. This is known as the tether point. Do not tighten until both turn-on and turn-off levels are established.
STEP 2: To adjust greater distance between turn-on and turn-off, increase cord length between tether point and float. For less distance between turn-on and turn-off decrease cord
STEP 3: Make sure the float is at least 2 inches above pump base, in the turn-off position, before tightening cable tie at the tether point.
STEP 4: Plug piggy-back switch cord (Currant Tap) into grounded outlet, then plug into piggy-back switch cord, and check for proper operation.
Additional Info
Additional Info
Brand MDI
SKU GF10W10R2
Stock Status Supplier Stocked Item
Other Products

Frequently bought together

Customers who bought this product also commonly purchased the following combination of items.