Munro StartBox MPSR242W22 - Pump Start Relay - Reduced Incoming Amperage - 24V (Signal ) to 220V (Line)
• Series: StartBox MPSR242 Series
• MPN: MSPR242W22
• Enclosure Color: Blue
• Enclosure Size: 6" x 6" x 4"
• Reduced Incoming Amperage Requirements: Less Than 0.35 Amp
• Resistive (Cos.=1): 12 Amps
• Signal Voltage: 24 Volt
• Line Voltage: 240 Volt
• Max HP Motor Using 240 Volts: 5 HP
Availability: Stocked Item
• The New Industry Standard StartBox
• This flexible, easy-to-install pump start relay provides “pilot-duty” operation for all electrically driven pump equipment and works with any reliable brand of 24v lawn controller – including 2-wire systems and those that provide less than .35 amps for pump start.
• Voltage specific – 110v or 220v – to match line voltage of the pump.
• Single unit eliminates the need for secondary transformers to be installed with decoders.
• Accepts a low amperage start signal from controller to provide all of the benefits of the standard StartBox, even though signal amperage is reduced.
• Dimensions – 6” x 6” x 4”
• UL and CUL listed relay
• NEMA 3R UL listed enclosure
StartBox - Standard Electrical Data
• Munro Relay: Certified 40 AMP Relay
• Resistive ( COS.=1 ): 12 AMPS
• Electrical Rating: 120V - 24FLA / 240V - 29FLA
• Short Circuit Rating: 120V - 5KA / 240V - 5KA
• Inrush/Run: 360MA / 270MA
• Phase/Hz: 1 / 60 Hz
|Controller (Signal) Volts||24 V|
|Motor ( Line ) Volts||240 V|
|Controller (Signal) Amperage||Reduced ( < 0.36 Amps )|
|Motor Horsepower||3/4 HP, 1 HP, 1-1/2 HP, 2 HP, 2-1/2 HP, 3 HP, 5 HP|
|Stock Status||Stocked Item|
Frequently bought together
Customers who bought this product also commonly purchased the following combination of items.
- This Item: Munro StartBox MPSR242W22 - Pump Start Relay - Reduced Incoming Amperage - 24V (Signal ) to 220V (Line)
Munro StartBox MPSR242W11 - Pump Start Relay - Reduced Incoming Amperage - 24V (Signal ) to 120V (Line)