(866) 202-8388
 
M-F: 8:30 am to 5:00 pm (EST)
Closed Weekends

Shakti QF5-10 - 4" Submersible Pump - 16 GPM - 1 HP - 230 Volts ( 3-Wire + Ground) - Complete w/ Control Box - SS

• Manufacturer: Shakti
• Model: QF Series - 4" Submersible Pump
• Model Number: QF5-10

• FULL 304 STAINLESS STEEL CONSTRUCTION
Similar to Grundfos 16S10-10 Submersible Pump

• Motor Horsepower: 1 HP
• Motor Voltage: 230 Volts
• Motor Phase / Hz: Single Phase / 60 Hz
• Motor Wire Type: 3-Wire Motor
• Motor Lead: 4-Wires ( L1 / L2 / Neutral / Ground )

• Pump GPM Rated: 16 GPM
• Pump Stages: 10 Stages
• Pump TDH Rated: 200 TDH*
• Pump Discharge Connection: 1-1/4" NPT

• Maximum Diameter: 3.90" ( Including Wire Cable Guard )
• Total Length: 29.4"
• Total Weight: 38 Lbs

Pumpset Includes: Motor / Pump / Control Box
SKU: QF5-10 ( Pumpset )

Availability: Supplier Stocked Item

$379.99
Details
Product Details
About Shakti QF Submersible Pumps
Shakti QF Series 4" submersible pumps are FULL STAINLESS STEEL, which makes them in high demand due to its innovative mechanical design and impeccable quality. They have carved a niche as the most predominant submersible pump manufactured in India. Shakti submersible pumps are manufactured from the superlative quality raw material using advanced fabrication technology, which ensure optimum performance and excellent quality.
Pump body is made with anti corrosive material with high wear resistance resulting in reduction in running costs and higher pumping efficiency and longevity. The pump are designed to work continuously for a longer period of time without any trouble. Higher reliability and best results even under harsh conditions make it acceptable to its users.

Shakti QF Series 4" Submersible Pumps - Highlight & Features
• Shakti QF submersible pumps and motors are completely of Stainless Steel AISI-304
• Stainless steel provides for good wear resistance and a reduced risk of corrosion when pumping ordinary cold water with a minor content of chloride
• Stainless steel means low weight facilitating the handling of pumps and resulting in low equipment costs and reduced installation and service time
• In addition pumps will be as new after service due to the high wear resistance of stainless steel
• All bearings are water- lubricated and have a square shape, enabling sand particles, if any, to leave the pump together with the pumped liquid
• The inlet strainer prevents particles over a certain size from entering the pump
• Check Valve - All pumps are equipped with a reliable non-return valve in the valve casing preventing back flow in connection with pump stoppage. Furthermore, the short closing time of the non-return valve means that the risk of destructive water hammer is reduced to a minimum. The valve casing is designed for optimum hydraulic properties to minimize the pressure loss across the valve and, thus, contributes to the high efficiency of the pump.
• Priming Screw - All QF submersible pumps are fitted with a priming screw. Consequently, dry running is prevented because the priming screw will make sure that pump bearing are always lubricated. Due to the semi-axial impellers of large QF pumps (except for QF 30) this priming is automatically provided. However, it applies to all pump types that if the water table is lowered to a level below the pump inlet neither pump nor motor will be protected against dry running.

Material of Construction
• Valve Casing - 304 SS
• Valve Cap - 304 SS
• Neck Ring - NBR/TPU
• Bearing - NBR
• Chamber - 304 SS
• Impellers - 304 SS
• Shaft Complete - 431 SS
• Strap - 304 SS
• Cable Guard - 304 SS
• Strainer - 304 SS
• Valve Seat - NBR
Additional Info
Additional Info
Pump / Equipment Type Submersible - Complete
Multi-Stage Yes
Horsepower Rated 1 hp
Voltage 230 Volt
GPM Range 11 to 20 gpm
Total Dynamic Head 151 to 200 ft
Brand Shakti
SKU QF5-10 ( Pumpset )
Stock Status Supplier Stocked Item
View Product Technical Guides
Shakti

Frequently bought together

Customers who bought this product also commonly purchased the following combination of items.